Specification
Model | LS-110SUB ACTIVE |
Type | Single 15" active subwoofer, flying model |
Drivers | 1x15inch speaker, 220mm magnet, 4inch voice coil |
Frequency Range | 35Hz-500Hz(-3dB) |
Power handling capacity | 500W RMS, 2000W Peak |
Sensitivity | 101dB/1W/1M |
MaximumSPL | 132dB Continue, 138dB Peak |
Rated Impedance | 8 ohm |
Construction | 18mm birch plywood box |
Aluminum alloy hoisting; black plastic painting | |
water/dust proof treating; | |
Dimensions | 580 x 460 x 600mm |
Net Weight | 61Kg |
Class D power amplifier module spec | |
Type | 3 channels class D switch power amplifier |
Output power | 400W+400W+900W/8Ω |
Input impedance | >20KΩ/>10KΩ |
Frequency Range | 20Hz-34KHz (+0/-0.3dB,1W/8Ω) |
crosstalk | >70dB (1 kHz) |
THD | <0.01% (4Ω/kHz%) |
S/N | >112dB |
Damping factor | 500 |
DSP with Screen | High quality DSP processor, 48kHz sampling rate of frequency;High quality AD/DA |
Channel mixing as need, with EQ, phase, delay, crossover, limit, gain, mute | |
15ms delay each channel,7 EQ each input, 6 EQ each output,running PEQ,High Sheif,Low Sheif EQ | |
3 filter: Butterworth,Bessel,Linkwitz-Riley,12dB,18dB,24dB,48dB adjustable,frequency 1/36 Oct | |
limiter,threshold,release time all adjustable | |
showing working temperature on screen | |
Protection way | Boot AC soft start automatic protection、Over current automatic tracking soft protection |
Clipping voltage limit, load short circuit/overheat/DC output off load, | |
shutdown protection, power on time delay | |
Connectors | XLR Female for input, XLR Male for output; |
XLR Female/Male Rs485 for DSP linking | |
USB for computer controling | |
Speakon NL4 to loop top speakers | |
Remark: | the power amp will drive 1 LS-110SUB+2LS-110 |
Contact: Frank
phones: 86-158 8929 7858
Tel: 0755-89236016
Email: info@ynwmjt.com
Add: 1#, Xinjia Industry Zone, Jinlong Rd. Shenzhen. Wechat. Whatsapp: 86-158 8929 7858